Wood grain transfer Aluminium Window Profiles for decoration material

Wood grain transfer aluminum window and door profiles use for decoration material

1.

Step 1: Select the substrate that has been sprayed or electrophoresis well;

The second step: with the wood heat transfer paper to be transferred to the substrate wrapped, with high temperature adhesive paper fixed paper interface, in case of wood heat transfer paper release; (Note: wood heat The front face of the paper is to be affixed to the substrate to be transferred.

The third step: the wood has been wrapped in thermal transfer paper wrapped on the substrate to withstand high temperature and good sealing of the plastic plastic bags, and then from the plastic bag at both ends of the vacuum, until the plastic bag can Fully and effectively close to the substrate;

Vacuum negative pressure should be based on the characteristics of the substrate and plastic plastic bags can withstand negative pressure and other factors to make appropriate adjustments, usually between 0.3 ~ 0.8Mpa. (Note: The purpose of using plastic plastic bags is to force the adhesive tape to be pressed against the substrate by negative pressure to force the wood thermal transfer paper to be fully and effectively attached to the substrate.

The fourth step: the wrapped substrate has been sent to the oven baking, baking temperature and the length of time should be based on the characteristics of the substrate to be transferred, to transfer the depth of the texture and the specific performance of the oven and other comprehensive factors Do the appropriate adjustment, usually transfer the temperature of 160 ~ 180 ℃, the time is 5 to 8 minutes;

Step 5: Remove the transferred substrate from the oven, pull the plastic bag from one end of the substrate to be transferred (note: this plastic bag can be reused), remove the heat transfer paper, Do the surface clean.

2.

The first step: selection has been sprayed or electrophoresis;

The second step: wrapped the transferred substrate with a PET thermal transfer film, and sealing the PET thermal transfer film into a tubular bag with an ultrasonic sealing machine. (Note: The front side of the PET thermal transfer film is to be transferred to the transferred substrate The material is transferred to the paste.)

The third step: from the tubular PET thermal transfer film bags of the two vacuum, until the PET thermal transfer film can be fully and effectively close to the substrate. Vacuum of the negative pressure should be based on the characteristics of the substrate and PET thermal transfer film can withstand negative pressure and other factors to make appropriate adjustments, usually between 0.3 ~ 0.8Mpa;

The fourth step: the wrapped substrate has been sent to the oven baking, baking temperature and the length of time should be based on the characteristics of the substrate to be transferred, to transfer the depth of the texture and the specific performance of the oven and other comprehensive factors Do the appropriate adjustment, usually transfer the temperature of 160 ~ 180 ℃, the time is 5 to 8 minutes;

Step 5: Remove the transferred substrate from the oven and remove the PET thermal transfer film by manual or mechanical blowing (ie, blowing the PET thermal transfer film tubular bag in a blown manner).

Q1: What is your main product?

A: We can supply the whole aluminum system (including profile, glass, hardware, accessories) as well as the finished products ready for installation.

Q2: What’s your price?

A: The price is based on buyer's specific requirements, so please provide below information to help us quote exact price to you.

1) Sketch to show the opening way, dimensions, quantity, wall thickness;

2) Profile surface treatment and its color;

3) Type of glass (single or double or laminated or others) /thickness of glass ( 5mm or 6mm or else , if you have no idea we can recommend according to window size) / color of glass (clear, tinted, reflective, Low-E or others, with Argon or without).

Q3: What is the standard size of your windows and doors?

A: Our product is CUSTOMER MADE. We always manufacture windows and doors according to buyer's dimensions.

Q4: What is your delivery time?

A: For the series we stocked, 10 working days, for the series unstocked, 40 working days.

Q5: What is your payment terms?

A: T/T, L/C, D/P, payment terms can be negotiable.

Q6: Will we need to install the glass (on site glazed) or do your windows come with the glass installed?

A: We will install glass at factory based on windows/doors dimension to make sure they can be safe during transportation and if easy for you to install the whole windows/doors, products on-site glazed are recommended for big sized products.

Q7: What is your warranty ? What do we do in case of problems?

A: 23 years quality warranty is provided, including frame unfading nor peel-off, hardware and accessories working properly under correct operation.

In case of our quality problem, we will provide replacement by international courier. Immediate delivery of replacement parts available in stock, and if not stocking, the time should be depending on material ordering time which is normally 10-15 days.

Q8: What kind of service will you provide?

A: We are able to provide the engineering as well as supervising service to guide installation our windows and doors, curtain wall as well.

Q9: Are your products Certificated?

A: Yes, we will make our product tested and certificated if your order quantity is one 40-feet-container.